change the boot characteristics? y/n [n]: n
Configuration Summary
enabled are:
console baud: 115200
boot: image specified by the boot system commands or default to: cisco3640
do you wish to change the configuration? y/n [n]: n
You must reset or power cycle for new config to take effect
rommon 2 > reset
注意：系統(tǒng)reset后，修改超級終端里com口的通訊速率為115200，重新啟動路由器，出現(xiàn) rommon 1> 提示符 即可通過xmodem命令下載IOS文件。 待升級完成后，修改回計算機串口與超級終端的波特率、路由器confreg下的xmodem等傳輸速率為9600bps |
